Viking 2 Input, Multi-Number Auto Dialer K-202-DVA

Messages can be recorded locally or remotely with a total message time for both inputs of two
minutes. The K-202-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection. Programming is easily done with a Touch Tone phone.

Viking 2 Input, Multi-Number Auto Dialer K-202-DVA Features & Specifications: 

• Non-volatile memory (no batteries required)
• Stores up to seven 32-digit phone numbers per input (fourteen 32-digit numbers total)
• 2 minutes of record time (1 minute per input)
• Programmable message repeat counter
• Programmable lap counter
• Two inputs programmable for normally open or normally closed and enabled or disabled
• Programmable ring delay for remote programming and alarm polling
• Programmable qualifier timer for each input (time for an event to be qualified as an alarm) Programmable resume timer for each input (time following reset for input to become active again)
• Call progress detection
• Programmable ringback limit for call progress
• Remote security and access codes
• Local or remote programming and recording
• Compatible with the RC-2A and RC-3 remote DTMF controllers
• Phone numbers may be programmed as pager numbers (no voice message played)
• Programmable hookswitch flash before dialing
• Local reset input
• Local alarm state indication LED