Categories: VoIP Hardware

Schools Updating IP Paging Systems Increase Security, Improve Response Time, and Avoid Incidents

VoIP Supply is featuring the latest IP Paging devices from three of the top paging and intercom manufacturers to help schools modernize their emergency notification methods.

The abilities of new IP Paging systems from CyberData, Valcom, and Advanced Network Devices (AND) are not limited like traditional analog systems: 

  • One Network:  IP paging systems don’t use separate voice and data networks – they’re combined into one.
  • Less Electrical Wiring:  The need for AC outlets and power adapters is removed with Power over Ethernet (PoE) enabled IP paging devices which speeds up installation time, provides more flexibility of choice in device location, and saves on the expense of installing power in remote areas.
  • Reduce Backup Batteries:IP paging systems reduce the reliance on several costly backup batteries during power failures. Instead, with PoE, a single UPS (uninterruptible power supply) can be used to provide backup power to an entire network.
  • One System:  IP paging works as a common system for all public announcements and emergency alerts and users can target messages to specific telephones, speakers, or areas of a building.

Targeted Messaging – More Than Just Speakers

IP Paging goes beyond just bringing voice to groups of people. IP Paging also includes IP Clocks, IP digital signage boards, and an array of IP Speaker choices to round out a unified message.

IP Paging Clock

One of the best things about network-based, IP paging devices is what’s called “targeted messaging.”
When used in together with paging management software, users have the control to send messages, sound or text, to one device, a handful of devices, or all IP paging devices on a network.

IP paging management software from Advanced Network Devices, for example, offers a “Security Guard” mode which can monitor live sound in remote rooms. Users will hear the disturbance before seeing it, providing the option to investigate if necessary.

Many IP paging devices work with 3rd party software such as Informacast, Cisco Call Manager, SA-Announce, and others.

Budget Savings

There are a couple of ways that schools can realize budget savings by using existing speakers from an old analog paging system while gaining enhanced IP paging features from a partial systems upgrade.

School paging systems use a variety of speakers including ceiling, wall, or horn models. When needed, they can be upgraded to something like Valcom IP Paging Speakers, manufacturer of the industry’s first IP loudspeaker and the first PoE loudspeaker.

But if the old speakers still work, why replace them? CyberData offers simple solutions to incorporate them into an IP paging solution:

  • CyberData IP Paging Gateway: Similar in form and function to a VoIP adapter or VoIP gateway, an IP paging gateway enables access to existing paging speakers through a VoIP phone system. The interface is designed to use an existing analog zone controller with a telephone answering machine (TAM) interface and can support paging for many zones from a VoIP phone.
  • CyberData Zone Controller: A VoIP paging zone controller enables access to existing paging speakers through a VoIP phone system and is designed to use a standard paging amplifier with audio inputs. Some CyberData models support paging up to 15 zone groups from a VoIP phone.

“IP paging expands intercom and notification systems in the way that VoIP provided so many new features to our phones,” said Garrett Smith, Chief Marketing Officer at VoIP Supply. “Schools can easily leverage IP paging systems by combining them with their existing IP voice and data networks while gaining powerful features like mass notification for emergency situations.”

Nathan Miloszewski

Nate is VoIP Supply's former Content Marketing Manager.

View Comments

  • I need a IP based Public address system that can perform both Public address and full duplex mode communication.

    The system has three parts:-
    A. Broadcast the live message to the all IP Unit.
    B. Point to Point real time communication in full duplex mode.
    C. Continuous Streaming of prerecorded message.
    The call/Live message and prerecorded message (MP3 or MP4 format) will be provided in the following way
    1. One to One.
    2. One to a specific group.
    3. One to all i.e. broadcast.
    The above operation should be perform from laptop or desktop computer also by single click of mice with the help of GUI Application software from where the
    1. IP Phone Module can be add or delete.
    2. Public area Image /Diagram shall be inserted.
    3. IP Phone Icon should be inserted or created on inserted diagram or image to perform the operation.
    4. Login based on created User.
    5. Event Report shall be generated.
    with rgards
    r kumar

Share
Published by
Nathan Miloszewski

Recent Posts

Watch Now: 2024 December VoIP News Update

https://youtu.be/vV0BDOCGiKs?si=jFrelg8-ddbcLhTC In the December VoIP News Update, two exciting developments in the VoIP space were…

3 days ago

Fanvil H5 Hotel Phone Product Feature & How to SIP Register to 3CX | VoIP Supply

https://youtu.be/UHKuBq0Pvuk?si=zS3KlwIkJz2-6vaq At VoIP Supply, we’re always excited to explore new solutions for businesses and industries,…

3 weeks ago

Fanvil X4U IP Phone Product Feature Video & Technical Tutorial

https://youtu.be/Wun3AMh_T08?si=fG3-TgyzrGT2gNIc In our latest video, we dive deep into the Fanvil X4U IP phone. Whether…

4 weeks ago

How to Prepare Your VoIP Systems for 2025

Remember Back to the Future II? I loved that movie because they traveled into the…

1 month ago

SIP Chats: Sharath Abraham of Jabra – Panacast 50, BYOD Solutions, and More!

https://youtu.be/qsNO-fZdY3U?si=1A2biOpTwvHG-wiB In the latest episode of SIP Chats, host Brian Hyrek sits down with Sharath…

1 month ago

Watch Now: 2024 November VoIP News Update

https://youtu.be/a--L6ZF9iAw VoIP Supply’s November VoIP News Update: Exciting New Tools, Upcoming Releases, and Giving Back…

1 month ago