Faxing and VoIP at a Near Flawless Success Rate

Well for those of you in the VoIP industry, and for those of you just starting to learn about it, you will hear many horror stories about VoIP and faxing. Often you will hear how unsuccessful it is, and some will hear more vulgar words in conjunction with it. But what if you had that magic wand to make it work? Would you trust it? Would you try it? To what extent would you try it before tossing it out the window? What if I told you that there is technology out there that can fix Faxing over VoIP that is notorious for not being successful and being the cause of many long days and even longer nights?

These are all questions that the great VoIP thinkers at Sangoma have put onto the drawing board and now have come up with a solution: The Sangoma Faxing Synch Cable. This was first introduced to us by Konrad Hammel, a Field Applications Engineer with Sangoma that visited VoIP Supply for Training on the newest PCI cards.

Wondering how it works, and what you need for a near flawless success rate?

Well let’s start off with an IP PBX. The Phonebochs appliance, trixbox appliance, or a blank chassis using Plain Jane Asterisk will do to start.

From there, PCI cards. More Specifically Sangoma analog and digital PCI cards. Which ones you ask? Well you will need two of them. A digital PCI card, like the A101D, or A102D (T1 Digital PCI card), and then an Analog card to hook your fax machine up to. (A20100D (2 Port FXS), A20200D (4 Port FXS)) Cards are good, but you can go to a bigger FXS card if you wish. The only limit to the amount of ports is that of your IP PBX and its limitations; however I do recommend using echo cancelation on both cards, and trust me, it is well worth it.

From here it doesn’t look like anything special–some of you may already have this and could possibly be drooling at this setup because it is easy. Well there is one more piece. And at this point you are probably thinking that it will be expensive and that now it’s not worth it to read on, but please keep reading, because what I am about to tell you will blow you away. The key to this is only $10. That’s right, for $10 you can have a near perfect success rate with LITTLE configuration of the cards and codecs. But how do you use it? Well this small cable will connect to a two prong section on the top of the Digital card, then the other end will hook up to a similar spot on the Analog card. From there, the cable will automatically start the synch and make it work. That’s it. Go figure. For decades this has been hindering businesses, and all it took was a small cable to fix it.

Garrett Smith

Garrett is the former VoIP Supply CMO.

View Comments

  • Just one question, what do this have to do with VoIP, where is the IP in this.
    This is just a clever analog to ISDN converter, this has nothing to do with VoIP
    For that you need a network kabel and 2 servers one with the analog card and the other with the ISDN card and a network cable in betwen.
    No the best solution for Fax and VoIP is g.711/g.722 and a large network connection with QoS, and large jitter buffer, and ofcause a fax where you can set to use a low connection speed

  • @Mark,
    I can understand where you are coming from with that statement. Nothing was new, or exciting and barely had IP in it. But the post was meant for those people that have purchased servers and cards that represent this type of set up and to give them a cost effective and easy solution.

    There is a large customer base in the past year that have spent $1200-2500 on the setup of 1 server and 2 PCI cards and it would be in their best interest to get the $10 cable to make it a successful faxing solution.

    The post was also meant for those still learning the trade that might not have the knowledge or time to do the suggestion you proposed. Mine was Easy, Cost effective and reliable.

    Thank you for your comment and i look forward to anything additional you may have to say.

  • I have had much better results using point to point (IP Dialing) between two fax optimized ATA's than with using T.38. With a reasonable amount of bandwidth at both ends, we are able to get close to 100% reliability. Try it ;-)

Share
Published by
Garrett Smith
Tags: FoIPSangoma

Recent Posts

Did You Know? VoIP Products Are Leading the Charge in Green Tech with Energy Efficiency?

In our gadget-loving, planet-hugging era, businesses are on the hunt for solutions that boost productivity…

4 days ago

Watch Now: 2024 October VoIP News Update

https://youtu.be/d167qfC_qCk?si=DVchHuXW_UT5dD8l Your October VoIP News Update is here! Tune in to get all the latest…

1 week ago

How To: How to Secure Your IP Paging System

Paging Dr. Smith, Clean Up Aisle 2, Johnny Report to the Office, Lost Car Key…

2 weeks ago

Shift from NEC to Sangoma: Powerful On-Prem Solutions for Business Webinar | October 2024

https://youtu.be/G8fuKPL8fSs?si=MIOeKuJM8S09K8px The time has come to make a switch from NEC, but we understand that…

2 weeks ago

October Hardware Roundup

S33 DECT Handset: Offers exceptional voice clarity and reliable connectivity for uninterrupted conversations. With durable…

2 weeks ago

Q&A: What Role Does Encryption Play in Protecting VoIP Communication?Q&A: 

I don’t know about you but when I heard the word encryption, I would think…

2 weeks ago