Author Profile

Recent posts by Garrett on IP Camera Supply

Motion Detection= Refers to the feature in some NVRs and DVRs to only record video if something in the image moves or changes. Therefore you don’t have to look through hours of stored video looking for something to happen. It also saves a lot of space on the hard drive, and allows you to record at a much lower frame rate when nothing is happening. When the system detects motion, the cameras can be kicked up to record at a higher frame rate (FPS).…

MPEG4 = MPEG4 is a newer codec and supports 3D content, low bit rate encoding, and support for Digital Rights Management, which controls the use of copyrighted digital work. MPEG4 is used for web-streaming media, broadcast television, videophones, and CD distribution. MPEG4 is widely used in video surveillance, and has recently been improved to the AVC standard. As the two formats, MJPEG and MPEG4, usually target different applications, MPEG4 is not expected to replace MJPEG. MJPEG is recommended for surveillance applications and recording, thanks to its ease of use, wide compatibility and high image quality. MPEG4 is recommended for live viewing and for applications where bandwidth and storage limitations are important factors.…

IP Cameras catch thieves at gas station pumps.

It’s important to watch what happens in the video. It is not what you would expect. For all of those gas station owners there are many advantages offered by IP camera surveillance technologies. Not only do they ensure the protection of your investment but they protect your customers. Because in the end that is all that you have…your customers. If they are not happy, and at a minimum–safe, then there is no way that they will return to your business.…

Lux = Used more often than lumens when discussing security cameras, a lux is a unit of illumination. It measures the amount of uniform light that falls on one square meter (expressed in one lumen per square meter). Security camera specs use the lux to indicate how much light they require to operate, with lower lux levels indicating a camera as more effective in lower ambient light. Look for 0.2 lux or less when choosing a low-light camera, and two lux or higher for daylight cameras. Refer to the specification sheet of the individual camera to see its lux rating. Below is a standard Lux Chart for your reference.

Lux

Russian Office Security Camera in use

Warning: this video is graphic in nature. It had been making it’s way across the webosphere this past week, and I was encouraged to post it by both my friends and colleagues.

This video shows the ‘why,’ we here at IPCS are here to show you ‘how.’

What’s important about commercial or office security cameras is that they enable businesses to keep an eye on threats to the company from the outside and the inside of the building. Especially when using IP Camera surveillance technology which allows remote access by simply going to the correct IP address. Office IP surveillance cameras are used regularly to ensure that the building remains safe from breaking and entering, but at the same …

IR= Infrared, assists with recording in near or total darkness. Many cameras have IR capabilities, both analog and IP. Some cameras have IR LEDs surrounding the lens of the camera that will kick on in low light or dark conditions, generating IR light which is invisible to the human eye, but which the camera can see. Think of it like an “invisible flashlight.” IR is often necessary when users want their security cameras to be able to continue to monitor events under low light conditions, or total darkness.…

Our good friend Jon Arnold plugged this very site yesterday on his blog and pointed out that we have the best answers for IP Camera questions. We really are striving to create a conversation regarding anything that you may want to know, and you can ask us anonymously if you wish. Whatever the IP Camera topic, feel free to contact us with questions, news, ideas, anything you want. And Jon–thanks for the nod!